📦 Target Containers

✨ New Features

• Added a “Do not mask recovery” flag to mask rules. When enabled, if a source recovers while a mask is applied during an alert, the overlay and logs reflect the recovery.

📦 Target Containers

✨ New Features

Node Editor (Beta)

• Added Node Editor (Beta).

  On a canvas, you can list and connect MediaConnect, MediaLive, MediaPackage, CloudFront, S3, MediaTailor, and MediaConvert resources on AWS with MediaHarbor sources. Create and delete resources, start and stop them, rewire connections, and run bulk Start/Stop on a multi-selection. Supports multiple regions and AWS accounts, on-premises equipment (Other / SW / HACOBE, etc.), protocol/port/bitrate labels on connection lines, cross-region cost warnings, and single-pipeline failure indicators for MediaLive STANDARD-class channels.

High-Quality Zoom Display

• Added the ability to zoom a source in high quality in the multiview.
• Under System Settings, “High-quality zoom display settings” lets you change the zoom bitrate and the number of concurrent zoom slots.

Multiview / Stream Information Bar

• Added the ability to set a display name for source name labels in the multiview separately from the source name.
• Added per-source Stream Information Bar settings (which badges to show, colors, and related display options). Patrol layouts respect the active item’s rules for name and bitrate overlays.

Video/Audio Monitoring (VAMon)

• Extended settings with loudness monitoring (presets and target LUFS), phase inversion, audio high/low level detection, and test tone detection (1 kHz / 400 Hz / 800 Hz).

Monitoring and Logs

• Added configurable log mask duration (0–60 seconds) at monitoring start and on patrol source switches.

🐛 Bug Fixes

System and API

• Fixed an issue where tally signals ignored the specified screen ID and were sent to all screens.

📦 Target Containers

🐛 Bug Fixes

• Fixed an issue where popping noise could occasionally be heard on playback audio.

📦 Target Containers

✨ New Features

• Added the ability to apply a mask for a specified number of seconds when monitoring starts.
• Added the ability to apply a mask for a specified number of seconds when switching screens while the rotation option is enabled.

🐛 Bug Fixes

• Fixed an issue where an error notification could be sent immediately after TS monitoring started, even when no actual error had occurred.
• Fixed an issue where the TS monitoring module could rarely stop unexpectedly.

📦 Target Containers

✨ New Features

• Added cookie-based column display settings for the input/monitoring settings screen.
• Added the ability to display more items in the column display settings for the input/monitoring settings screen.
• When the log notification history increases in quantity, it is now deleted up to 10,000 to prevent the notification history screen from not being displayed.
• Browser source profile data is now persisted. Browser session information is retained even after container restarts.
• For audio/video monitoring SILENT occurrence logs, the log detail JSON now indicates whether silence was detected on the left channel only, the right channel only, or on both L and R.
• When a source recovers while masked during an active alert, the overlay now correctly disappears after the mask is released.
• Added screen ID display on the screen view.

🐛 Bug Fixes

• Fixed an issue where 10-bit HEVC playback could rarely render video in green.
• Fixed an issue where deleting the top row in mask settings could cause an application error when three or more mask entries were registered.

📦 Target Containers

✨ New Features

• Added receiver container settings to the input/monitoring configuration screen. You can now configure delayed startup to prevent a sudden surge in CPU usage when launching multiple receiver containers simultaneously.
• Added resource import/export functionality.
• Added duplicate functionality to the resource dialog.
• Added receiver container restart via right-click on the multiview screen.
• Added Crew AI, an AI chat feature that can invoke MediaHarbor’s MCP to perform operations.

📦 Target Containers

✨ New Features

• You can now specify the frame rate for browser inputs.
• More than 11 browser inputs can now be displayed.
• Improved performance to reduce the load of browser inputs.

🐛 Bug Fixes

• Fixed an issue where the status in browser input audio/video monitoring would sometimes not update.
• Fixed an issue where audio-related problems could occur during long-term operation.

📦 Target Containers

✨ New Features

• The browser URL is now retained after operating via web browser input.
• Added a feature that automatically deletes logs based on available storage capacity.
• You can now select the scroll width of the source name display from three options: auto width, half width, and full width.
• Added a feature to display a fallback logo screen when video frames are missing.
• Added a button to duplicate settings in the source settings edit dialog.
• Added the ability to download rotated (past) logs in container log downloads.

🐛 Bug Fixes

• Fixed an issue where the probe size setting was not applied correctly.
• Fixed an issue where the probe size shown in the UI could differ from the actual value when no probe size was set.
• Fixed an issue where the source name display disappeared after removing and re-adding a source to a layout.
• Fixed an issue where audio became monaural during low-latency playback (WebRTC).
• Fixed an issue where license error logs were output even when there were no patrol sources if PATROLpt was set to 0.
• Fixed an issue where the TS monitoring overlay was not displayed.
• Fixed an issue where the overlay was not displayed when monitoring was disabled via Bulk Monitoring Settings in the Monitoring Settings List with a patrol source (PATROL) selected, even if monitoring was enabled in the individual patrol settings.
• Fixed an issue where correct information was not passed to Webhook notifications when an error occurred in a patrol source.

⚡ Functionality Improvements

• Added a feature that attempts automatic recovery when output from the RTP input module stops.
• Implemented measures to improve playback stability for HEVC.
• Modified the conditions for entering the silent audio generation process; the system now waits for audio if audio data is insufficient.
• Added detection and recovery processes for PTS synchronization discrepancies.
• Improved log retrieval when there are many error notification histories.
• Fixed an issue where the monitoring status of the patrol source was not displayed in the input monitoring settings screen.
• Improved the stability of RTP stream playback.

⚡ Functionality Improvements

• Fixed an issue where the installer failed to install the Docker Compose Plugin on Amazon Linux 2023 environments.

📦 Target Containers

🐛 Bug Fixes

• Fixed an issue where the mhb container could not start when access destinations were restricted in proxy environments.

📦 Target Containers

✨ New Features

• An icon is now displayed when overlay mask or log mask is active.
• When source name display is enabled in Multi-view, long source names now scroll.

🐛 Bug Fixes

Installer

• Fixed an issue where the installer would not work on hosts running Docker version 24 or older.

📦 Target Containers

✨ New Features

• Added an overlay display when switching patrol modes.
• Added a button to restart containers.
• Added import/export functionality for mask settings.
• Added a copy button to transfer settings between log masks and overlay masks.
• Added a release notes card to the top page.
• Added a card showing running container versions to the top page.
• Enabled browser operation by double-clicking on the web browser input.
• Audio can now be captured from the web browser input.

📦 Target Containers

⚡ Functionality Improvements

• Updated to attempt automatic recovery when input disconnection is detected.

🐛 Bug Fixes

• Fixed an issue where clearing all log level selections on the event log screen resulted in an error screen.
• Fixed an issue where selecting Sunday in the mask settings caused an error and prevented saving.

📦 Target Containers

🐛 Bug Fixes

• Fixed an issue where SRT Listener outputs could not be started multiple times in the output settings.
• Removed the maximum bitrate setting option from the output settings.

📦 Target Containers

🐛 Bug Fixes

• Fixed an issue where newly created input source settings were not applied correctly in environments after the v2025.10.6 update.

📦 Target Containers

🩹 Minor Fixes

• Changed the maximum (default) value for log retention days to 3,650 days.

📦 Target Containers

✨ New Features

• Added support for receiving via the NDI® protocol.
  * NDI® is a registered trademark of Vizrt NDI AB
  * For more information, please visit the NDI official website .

📦 Target Containers

🐛 Bug Fixes

Receiver

• Fixed an issue where the overlay display for audio and video monitoring would stop updating.

📦 Target Containers

✨ New Features

• Added support for JPEG XS

• Added TS monitoring functionality

✨ New Features

Installer

• You can now select the installation version when running the installer.

🐛 Bug Fixes

Installer

• Fixed an issue where WebRTC playback could not be configured correctly when installed in an IPv6 environment with NAT traversal.

🐛 Bug Fixes

Installer

• Fixed an issue where the Zabbix Agent container could not be connected.

📦 Target Containers

✨ New Features

• Added functionality to display information for incoming streams.

  You can check this by opening the edit screen of a source used in the layout.

  

• Added the ability to measure the incoming bitrate value for each input source.

• Added logging functionality for input signal drop detection and low-bandwidth input signal detection.

✨ New Features

Installer

• Enabled connectivity to the Zabbix Agent container from an external Zabbix Server.

✨ New Features

Installer

• Added the construction process for the Memcached container.

📦 Target Containers

✨ New Features

• Added a deinterlacing function to the detailed settings of the input source.
• Added a rescaling function to the detailed settings of the input source.

📦 Target Containers

🐛 Bug Fixes

• Fixed an issue where SCTE35 log output was not functioning correctly due to changes in Fluent Bit’s behavior specifications.

📦 Target Containers

✨ New Features

• Added support for AES67 input.
• Enabled reordering of layout items.
• Added a search function for sources in the layout edit screen.

🐛 Bug Fixes

• Fixed an issue on iPhone where switching from HLS to WebRTC caused both to play simultaneously, resulting in doubled audio.
• Fixed an issue in the layout edit screen where pressing the Delete key on the keyboard sometimes removed non-selected sources from the layout.

🩹 Minor Fixes

• MediaHarbor now starts with the last displayed layout upon reboot.
• Added a feature to prevent setting the same internal connection port number as other sources.
• Fixed an issue where there was an extra margin at the bottom of the layout edit screen.

🔒 Security Updates

• Addressed the Fluent Bit vulnerability CVE-2024-4323 .

📦 Target Containers

✨ New Features

• Added log and overlay masking functionality.

🐛 Bug Fixes

• Implemented measures to address issues where DTS rolls back or transcoding cannot continue due to data loss.
• Fixed the issue where streams do not display after reloading the SRT Browser.
• Adjusted to add a 2-second keyframe to browser streams.
• Fixed the issue where receiving processing does not resume after it ends when the HLS playlist reaches the end.

📦 Target Containers

✨ New Features

• Added Slack notification and email sending functionality for logs.
• Added a notification rule setting screen.
• Added a notification destination setting screen.
• Added a masking function for logs and overlays.
• Added a notification masking function.

🎨 UI/UX Improvements

• The blue border for audio selection is now on the browser side, so it will not be applied to videos.
• Implemented a blue border feature for audio selection on the browser side.
• Modified to continue playback without stopping the receiving container when changing the layout while the same source is included in multiple layouts.
• Layout changes are now queued to fix the issue where continuous layout changes would stop at misaligned positions.
• Added log level retention feature to event logs.
• Modified to retain the order of the dashboard.

🐛 Bug Fixes

• Fixed the issue where non-16:9 resolutions were mixed in the resolution selection for web browser input.
• Fixed the issue where video and browser would not be displayed after mhb restart.
• Fixed the issue where mhb would stop if the license manager could not be accessed.
• Fixed a sigsegv occurring in TickView.
• Fixed a sigsegv occurring during audio encoding when updating the layout.
• Fixed an issue where WebRTC playback would drop to 1fps in certain environments.

🩹 Minor Fixes

• Added email sending split function.
• Adjusted codec parameters: Fixed the issue where a large number of slices would cause stuttering in environments with many cores.
• Fixed the issue where Grafana would not be displayed when registered to multiple input sources due to an upper limit.
• The SCTE35 dashboard template is now included in the initial installation.

📦 Target Containers

✨ New Features

Installer

• Now supports installation in proxy environments.

API

• Now supports operation in proxy environments.

Receiver

• Now supports operation in proxy environments.

📦 Target Containers

✨ New Features

Event Log Screen

• Added an event log screen.
• Added a log settings screen.

Dashboard Screen

• Added a dashboard screen.
• Added a dashboard settings screen (Grafana).
• Enabled setting Grafana dashboards as input sources.

📦 Target Container

🐛 Bug Fixes

UI

• Fixed a bug where deleting an input source would cause an error due to its impact on the currently displayed layout, leading to the API container restarting.
• Corrected the display of SRT and RTP port numbers in the connection information section of the Input/Monitoring Settings screen, which were shown as internal connection port numbers.
• Fixed an issue on the Input/Monitoring Settings screen where the default values were being entered into the port number field when the edit button was pressed.

receiver

• Fixed an issue where the RTP reception function did not work when routed through the receiver container.

⚡ Feature Improvements

UI

• Removed the FEC setting option for RTP input as it has been automated.

mhb

• Reduced memory usage when no background image is set.
• Adjusted to accept background image sizes up to 4MB.

📦 Target Container

Receiver

• Released the ARM version of the receiver container.

📦 Target Containers

✨ New Features

UI

• Added the ability to set the bitrate of WebRTC in the system settings screen.
• Added the ability to enable/disable SRT output and set the bitrate in the system settings screen.
• Added the ability to enable/disable HDMI output in the system settings screen.
• Added HLS, color bar, and Web browser to the input protocol of the source settings.
• Added the ability to set a background image for the layout.
• Added the ability to deselect the audio selection by clicking the source with the audio selection frame again on the multi-view screen.
• Added monitoring option settings.

📦 Target Containers

UI

• Added probe size to the detailed settings of the input source.

📦 Target Containers

✨ New Features

UI

• Added input/monitoring settings screen.

• Added the ability to import/export input settings.
• Added probe size to the detailed settings of the input source.

mhb

• Added probe size setting.

🐛 Bug Fixes

mhb

• Fixed an issue with CPU compatibility that prevented it from running on AMD CPUs.
  Made adjustments to support operation from Skylake (6th generation) and later.
• Fixed an issue where attempting to play TS files shorter than 60 seconds could sometimes fail.

🔒 Security Updates

proxy

• Allowed iframe embedding for convenience.

📦 Target Containers

✨ New Features

UI

Layout Settings

• Enabled zooming in/out of elements using +/- buttons.

🐛 Bug Fixes

mhb

• Fixed an issue where resources would not update until a restart, even after being updated.

🩹 Minor Fixes

UI

Layout Settings

• Fixed an issue where elements could be placed off the grid positions during layout editing.

📦 Target Containers

✨ New Features

UI

Layout Settings

• Added timezone settings to the clock resource.

🎨 UI/UX Improvements

UI

Layout Settings

• Improved the settings screen when selecting File as the input source type.

📦 Target Containers

🐛 Bug Fixes

UI

Layout Settings

• Fixed a bug where the configuration data could get corrupted when updating the input source settings.

📦 Target Containers

✨ New Features

UI

System Settings

• Added a feature to display a list of active containers.
  • You can also check the version and logs from here.

📦 Target Containers

✨ New Features

• Public release of the installer
• Public release of the production Docker image
• Added Ubuntu and arm versions

🐛 Bug Fixes

• Fixed a bug where the video was disrupted when receiving a YUV 4:2:2 10bit signal.

💥 Major Changes

• Changed the DB engine to MariaDB 11.

📦 Target Containers

✨ New Features

UI, API

Input Source Settings

• Detailed settings for SRT can now be configured.

📦 Target Containers

✨ New Features

• Beta version pre-released.